logo
Products
Technologies
Applications
Services
Resources
Selection Guides
About
ReadiCleave™ XFD647 AML-NHS ester
Fluorescence-based methods have many advantages for biological detection in terms of sensitivity and convenience. Many biological molecules can be readily labeled with a fluorescent tag for fluorescence imaging and flow cytometry analysis. However, most of the existing fluorescent tags are used to permanently label biological targets from which the added fluorescent tags cannot be cleaved for further downstream analysis, such as mass spectral analysis. AAT Bioquest’s ReadiCleave™ linkers enable fluorescent tags to be conjugated to a biological target from which the added fluorescent tag can be removed when needed. This ReadiCleave™ AML XFD647 contains an azidomethyl linker that can be cleaved with TCEP to remove the Alexa Fluor® 647 fluorophore from the conjugated molecule. The cleavage can be carried out by adding 10 mM TCEP solution (pH 7.5) and incubating at 65 °C for 1-5 min. XFD647 is the same fluorophore as Alexa Fluor® 647 (Alexa Fluor® is the trademark of ThermoFisher). Alexa Fluor® 647 is a popular fluorescent dye used in fluorescence microscopy and flow cytometry. It is known for its high fluorescence intensity, which makes it a valuable tool for detecting and imaging specific targets in biological samples. Alexa Fluor 647 has an excitation wavelength around 650 nanometers and an emission wavelength around 668 nanometers. This far-red to near-infrared emission range is advantageous because it reduces background fluorescence and autofluorescence from biological samples.
AAT Bioquest’s ReadiCleave™ linkers enable fluorescent tags conjugated to a biological target from which the added fluorescent tag can be removed when needed. ReadiCleave™ AML XFD647 contains an azidomethyl linker that can be cleaved with TCEP to remove the Alexa Fluor® 647 fluorophore from the conjugated molecule. The cleavage can be carried out by adding 10 mM TCEP solution (pH 7.5), and incubating at 65 °C for 1-5 min.
AAT Bioquest’s ReadiCleave™ linkers enable fluorescent tags conjugated to a biological target from which the added fluorescent tag can be removed when needed. ReadiCleave™ AML XFD647 contains an azidomethyl linker that can be cleaved with TCEP to remove the Alexa Fluor® 647 fluorophore from the conjugated molecule. The cleavage can be carried out by adding 10 mM TCEP solution (pH 7.5), and incubating at 65 °C for 1-5 min.
protocol
Protocol
sds
SDS
COA
CatalogSize
Price
Quantity
70121 mg
Price
 
Physical properties
Molecular weight1609.00
SolventDMSO
Spectral properties
Correction factor (260 nm)0.00
Correction factor (280 nm)0.03
Extinction coefficient (cm -1 M -1)
239000
Excitation (nm)650
Emission (nm)671
Quantum yield
0.33
1
Storage, safety and handling
H-phraseH303, H313, H333
Hazard symbolXN
Intended useResearch Use Only (RUO)
R-phraseR20, R21, R22
StorageFreeze (< -15 °C); Minimize light exposure
UNSPSC12171501
Documents
Protocol
Safety Data Sheet
Certificate of Analysis
Contact us
Telephone
Fax
Emailsales@aatbio.com
InternationalSee distributors
Bulk requestInquire
Custom sizeInquire
Technical SupportContact us
Request quotationRequest
Purchase orderSend to sales@aatbio.com
ShippingStandard overnight for United States, inquire for international
Page updated on October 19, 2025