logo
AAT Bioquest

Rhod-5N, AM

Calcium measurement is critical for numerous biological investigations. Fluorescent probes that show spectral responses upon binding Ca2+ have enabled researchers to investigate changes in intracellular free Ca2+ concentrations by using fluorescence microscopy, flow cytometry, fluorescence spectroscopy and fluorescence microplate readers. Rhod-5N has a lower binding affinity for Ca2+ (Kd = ~320 µM) than any other BAPTA-based indicator and is suitable for Ca2+ measurements from 10 µM to 1 mM. Like the parent Rhod-2 indicator, Rhod-5N is essentially nonfluorescent in the absence of divalent cations and exhibits strong fluorescence enhancement with no spectral shift upon binding Ca2+. Rhod-5N AM is cell-permeable version of Rhod-5N.

Example protocol

PREPARATION OF STOCK SOLUTIONS

Unless otherwise noted, all unused stock solutions should be divided into single-use aliquots and stored at -20 °C after preparation. Avoid repeated freeze-thaw cycles

Rhod-5N AM Stock Solution
  1. Prepare a 2 to 5 mM stock solution of Rhod-5N AM in high-quality, anhydrous DMSO.

PREPARATION OF WORKING SOLUTION

Rhod-5N AM Working Solution
  1. On the day of the experiment, either dissolve Rhod-5N AM in DMSO or thaw an aliquot of the indicator stock solution to room temperature.

  2. Prepare a 2 to 20 µM Rhod-5N AM working solution in a buffer of your choice (e.g., Hanks and Hepes buffer) with 0.04% Pluronic® F-127. For most cell lines, Rhod-5N AM at a final concentration of 4-5 μM is recommended. The exact concentration of indicators required for cell loading must be determined empirically.

    Note: The nonionic detergent Pluronic® F-127 is sometimes used to increase the aqueous solubility of Rhod-5N AM. A variety of Pluronic® F-127 solutions can be purchased from AAT Bioquest.

    Note: If your cells contain organic anion-transporters, probenecid (1-2 mM) may be added to the dye working solution (final in well concentration will be 0.5-1 mM) to reduce leakage of the de-esterified indicators. A variety of ReadiUse™ Probenecid products, including water-soluble, sodium salt, and stabilized solutions, can be purchased from AAT Bioquest.

SAMPLE EXPERIMENTAL PROTOCOL

Following is our recommended protocol for loading AM esters into live cells. This protocol only provides a guideline and should be modified according to your specific needs.

  1. Prepare cells in growth medium overnight.
  2. On the next day, add 1X Rhod-5N AM working solution to your cell plate.

    Note: If your compound(s) interfere with the serum, replace the growth medium with fresh HHBS buffer before dye-loading.

  3. Incubate the dye-loaded plate in a cell incubator at 37 °C for 30 to 60 minutes.

    Note: Incubating the dye for longer than 1 hour can improve signal intensities in certain cell lines.

  4. Replace the dye working solution with HHBS or buffer of your choice (containing an anion transporter inhibitor, such as 1 mM probenecid, if applicable) to remove any excess probes.
  5. Add the stimulant as desired and simultaneously measure fluorescence using either a fluorescence microscope equipped with a TRITC filter set or a fluorescence plate reader containing a programmable liquid handling system such as an FDSS, FLIPR, or FlexStation, at Ex/Em = 540/590 nm cutoff 570 nm.

Calculators

Common stock solution preparation

Table 1. Volume of DMSO needed to reconstitute specific mass of Rhod-5N, AM to given concentration. Note that volume is only for preparing stock solution. Refer to sample experimental protocol for appropriate experimental/physiological buffers.

0.1 mg0.5 mg1 mg5 mg10 mg
1 mM86.586 µL432.93 µL865.861 µL4.329 mL8.659 mL
5 mM17.317 µL86.586 µL173.172 µL865.861 µL1.732 mL
10 mM8.659 µL43.293 µL86.586 µL432.93 µL865.861 µL

Molarity calculator

Enter any two values (mass, volume, concentration) to calculate the third.

Mass (Calculate)Molecular weightVolume (Calculate)Concentration (Calculate)Moles
/=x=

Spectrum

Product family

NameExcitation (nm)Emission (nm)Quantum yield
Rhod-2, AM *CAS#: 145037-81-6*5535770.11
Rhod-2, AM *UltraPure Grade* *CAS#: 145037-81-6*5535770.11
Rhod-FF, AM553577-
Rhod-4™, AM5235510.11
Fluo-5N, AM *Cell permeant*494516-

Citations

View all 4 citations: Citation Explorer
Fluorescence hydrogel array based on interfacial cation exchange amplification for highly sensitive microRNA detection
Authors: Wu, Lina and Wang, Yingfei and He, Rong and Zhang, Yue and He, Yuling and Wang, Chao and Lu, Zhenda and Liu, Ying and Ju, Huangxian
Journal: Analytica Chimica Acta (2019)
Activation of mitochondrial transient receptor potential vanilloid 1 channel contributes to microglial migration
Authors: Miyake, Takahito and Shirakawa, Hisashi and Nakagawa, Takayuki and Kaneko, Shuji
Journal: Glia (2015): 1870--1882
Papel central de la mitocondria en la hepatotoxicidad inducida por Efavirenz
Authors: G{\'o}mez Sucerquia, Leysa Jackeline
Journal: (2013)
ER stress in human hepatic cells treated with Efavirenz: mitochondria again
Authors: Apostolova, Nadezda and Gomez-Sucerquia, Leysa J and Alegre, Fern and o , undefined and Funes, Haryes A and Victor, Victor M and Barrachina, Maria D and Blas-Garcia, Ana and Esplugues, Juan V
Journal: Journal of hepatology (2013): 780--789

References

View all 2 references: Citation Explorer
Ionic calcium determination in skim milk with molecular probes and front-face fluorescence spectroscopy: simple linear regression
Authors: Gangidi RR, Metzger LE.
Journal: J Dairy Sci (2006): 4105
Measurement of limestone biodeterioration using the Ca2+ binding fluorochrome Rhod-5N
Authors: McNamara CJ, Perry TDt, Bearce K, Hern and ez-Duque G, Mitchell R.
Journal: J Microbiol Methods (2005): 245
Page updated on November 9, 2024

Ordering information

Price
Unit size
Catalog Number21070
Quantity
Add to cart

Additional ordering information

Telephone1-800-990-8053
Fax1-800-609-2943
Emailsales@aatbio.com
InternationalSee distributors
Bulk requestInquire
Custom sizeInquire
Technical SupportContact us
Purchase orderSend to sales@aatbio.com
ShippingStandard overnight for United States, inquire for international
Request quotation

Physical properties

Dissociation constant (Kd, nM)300000

Molecular weight

1154.92

Solvent

DMSO

Spectral properties

Excitation (nm)

557

Emission (nm)

580

Storage, safety and handling

H-phraseH303, H313, H333
Hazard symbolXN
Intended useResearch Use Only (RUO)
R-phraseR20, R21, R22

Storage

Freeze (< -15 °C); Minimize light exposure
UNSPSC12352200

Platform

Fluorescence microscope

ExcitationTRITC filter set
EmissionTRITC filter set
Recommended plateBlack wall, clear bottom

Fluorescence microplate reader

Excitation540
Emission590
Cutoff570
Recommended plateBlack wall, clear bottom
Instrument specification(s)Bottom read mode, Programmable liquid handling
Product Image
Product Image
Gallery Image 1