logo
AAT Bioquest

CytoFix™ Red Lysosomal Stain

The fluorescence images of HeLa cells stained with CytoFix&trade; LysoRed in a 96-well black-wall clear-bottom plate. Image was acquired before (Left) and after (Right) fixation with 4% formaldehyde solution for 20 minutes at RT. The cells were imaged using fluorescence microscope with a Cy3/TRITC filter.<br>&nbsp;
The fluorescence images of HeLa cells stained with CytoFix&trade; LysoRed in a 96-well black-wall clear-bottom plate. Image was acquired before (Left) and after (Right) fixation with 4% formaldehyde solution for 20 minutes at RT. The cells were imaged using fluorescence microscope with a Cy3/TRITC filter.<br>&nbsp;
The fluorescence images of HeLa cells stained with CytoFix&trade; LysoRed in a 96-well black-wall clear-bottom plate. Image was acquired before (Left) and after (Right) fixation with 4% formaldehyde solution for 20 minutes at RT. The cells were imaged using fluorescence microscope with a Cy3/TRITC filter.<br>&nbsp;
Ordering information
Price
Catalog Number
Unit Size
Quantity
Add to cart
Additional ordering information
Telephone1-800-990-8053
Fax1-800-609-2943
Emailsales@aatbio.com
InternationalSee distributors
Bulk requestInquire
Custom sizeInquire
ShippingStandard overnight for United States, inquire for international
Request quotation
Physical properties
Molecular weight863.75
SolventDMSO
Spectral properties
Excitation (nm)565
Emission (nm)585
Storage, safety and handling
H-phraseH303, H313, H333
Hazard symbolXN
Intended useResearch Use Only (RUO)
R-phraseR20, R21, R22
StorageFreeze (< -15 °C); Minimize light exposure
UNSPSC12171501

OverviewpdfSDSpdfProtocol


See also: Lysosomes
CAS
N/A
Molecular weight
863.75
Excitation (nm)
565
Emission (nm)
585
Lysosomes are cellular organelles which contain acid hydrolase enzymes to break up waste and cellular debris through a process known as autophagy. AAT Bioquest offers CytoFix™ Red lysosomal stain for selectively staining lysosomes. CytoFix™ Red lysosomal stain is well retained in lysosomes even after fixation. The dye permeates intact live cells and gets trapped in lysosomes. The fluorescence in lysosomes generated by this dye is well retained at least for 1 week, making it an excellent lysosomal tracking dye. The key features of this stain are its high staining efficiency, long retention after fixation with minimal hands on time. CytoFix™ Red lysosomal stain can be used with GFP expressed cells or with other organelles stains for multicolor analysis. It can be used for both suspension and adherent cells and readily adapted for a wide variety of fluorescence platforms.

Platform


Fluorescence microscope

ExcitationCy3/TRITC filter set
EmissionCy3/TRITC filter set
Recommended plateBlack wall/clear bottom
Instrument specification(s)Cy3/TRITC filter set

Calculators


Common stock solution preparation

Table 1. Volume of DMSO needed to reconstitute specific mass of CytoFix™ Red Lysosomal Stain to given concentration. Note that volume is only for preparing stock solution. Refer to sample experimental protocol for appropriate experimental/physiological buffers.

0.1 mg0.5 mg1 mg5 mg10 mg
1 mM115.774 µL578.871 µL1.158 mL5.789 mL11.577 mL
5 mM23.155 µL115.774 µL231.548 µL1.158 mL2.315 mL
10 mM11.577 µL57.887 µL115.774 µL578.871 µL1.158 mL

Molarity calculator

Enter any two values (mass, volume, concentration) to calculate the third.

Mass (Calculate)Molecular weightVolume (Calculate)Concentration (Calculate)Moles
/=x=

Spectrum


Open in Advanced Spectrum Viewer
spectrum

Spectral properties

Excitation (nm)565
Emission (nm)585

Product Family


NameExcitation (nm)Emission (nm)
CytoFix™ Red Mitochondrial Stain564651

Images