AAT Bioquest

Amplite® Human Apolipoprotein A1 (ApoA1) Kit *Optimized For ELISA Development with ALP*

Ordering information
Catalog Number
Unit Size
Add to cart
Additional ordering information
InternationalSee distributors
Bulk requestInquire
Custom sizeInquire
ShippingStandard overnight for United States, inquire for international
Request quotation
Storage, safety and handling
H-phraseH303, H313, H333
Hazard symbolXN
Intended useResearch Use Only (RUO)
R-phraseR20, R21, R22


Example protocol


Intended use: For quantitative determination of human Apolipoprotein A1 (apoA1) in serum/ plasma samples and cell culture supernatants. Please note that wash-, block- and incubation buffers should contain detergent. Tween 20, Triton X-100 or NP40 can be used at a concentration of 0.05-0.5%. In block and incubation buffers it is recommended to use 0.1% BSA, but not bovine serum, as HDL 44 also binds bovine apoA1.
Serum/plasma samples: When analyzing human serum/plasma samples it is recommended to use Apo ELISA buffer for dilution of samples, standard and detection antibody. The buffer prevents false positive read-outs which may be caused by interference of heterophilic antibodies commonly found in human plasma and serum. Triton X-treatment of samples, necessary for apoB analysis, will not interfere with apoA1 analysis. It is recommended to dilute se- rum/plasma samples 150,000x to 200,000x, see dilution guidelines at https://www.mabtech.com/ knowledge-center/apodilution. Avoid repeated freezing-thawing cycles and do not store samples in -20°C. Samples stored in -20°C will give false high apoA1 values.
Note     Apo ELISA buffer is not provided in this kit. is not provided in this kit. It can be purchased fromMabtech (product code: 3652-M2).

Reagents: Antibodies are supplied in sterile-filtered (0.2 μm) PBS with sodium azide (0.02%). Streptavidin-ALP is supplied in 0.1 M Tris buffer with 0.002% Kathon CG.
Standard range: 0.6-40 ng/ml


Unless otherwise noted, all unused stock solutions should be divided into single-use aliquots and stored at -20 °C after preparation. Avoid repeated freeze-thaw cycles.
Prepare apoA1 standard by reconstituting contents of vial 4 in 1 ml PBS with 1% BSA, do not stir and leave at room temperature for 15 minutes followed by vortex for 3 sek. This gives a stock solution of 4 μg/ml which should be used immediately or stored in aliquots at -20°C for future use. We recommend the aliquots not to be refrozen after initial use. For the test, prepare dilutions of the stock using the stand- ard range as a guideline.